-
COFDM Transmitter
-
COFDM Video Transmitter
-
COFDM Wireless Transmitter
-
UAV Data Link
-
UAV Video Transmitter
-
Drone Video Transmitter
-
IP Mesh Network
-
Wireless Mesh Network Products
-
Mini Video Transmitter
-
COFDM HD Transmitter
-
Hidden Camera Video Transmitter
-
COFDM Receiver
-
Wireless Ethernet Bridge
-
Wireless Elevator Camera System
-
Analog Video Transmitter
-
Drone Video Link
-
Brian HamiltonYours is the best I have found so far.
-
AlexAfter ordering from you in July. we want to expand our cooperation, please give me solution for Long range Transmitter around 40-70KM. Thanks!
-
ChrisThe Transmitter ST11HPT working perfect! We will order more soon. Look forward to establish long term business relationship with you!
10km COFDM Wireless Audio Video Transmitter 12-25ms Latency With RJ45 RS232 Port

Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xModulation | COFDM | Frequency | 2.4GHz (2.402-2.478GHz) |
---|---|---|---|
Transmitting Power | 1000mW (30Bbm) | Transmission Distance | Air To Ground 10km |
Transmitting Rate | 70Mbps | Interface | Doublle RJ45 Port And RS232 |
Size | 68×48x14mm | Net Weight | Tx:58g Rx: 58g |
High Light | cofdm hd wireless transmitter,wireless hd video transmitter |
12-25ms latency with RJ45 RS232 port Drones 10km COFDM Wireless Audio Video Data Transmitter
Introduction:
ST10NPT this exclusive design mini HD wireless video transmitter ST10NPT is using the 4th generation mobile communication core COFDM multi-carrier modulation technology. It supports 2.4GHz(2. 402~2. 478 GHz) and suitable for long distance, high code stream and wireless aerial transmission application. With RS232 bidirecitonal port, can transmit video audio and control signal in a long distance up to 10km.
Its advantages small size, lightweight and high bandwidth that can transmit high quality full 1080P HD video and audio even though high-speed mobile shooting. It’s widely used in UAV aviation filming.
Main Features:
- Operates at 2.4GHz frequency, no license needed, and only suitable for LOS(Line-of-Sight) use
- Transmission power 1000mW
- Long operating range over 10km
- Air speed up to 10Mbps,down link up to 6Mbps, up link up to 800kbps
- Link establishing/recover time 12-25ms
- Compact size of 68×48x14mm
- Light weight less than 58g
- Point-to-Point and Point-to-Multipoint supported
- Optimized transmission for 1080P high definition video
- Support two remote controllers to control UAV and on board devices through the PPM port of Local Side Unit. And the On Board Unit outputs the control signals through one SBus port and two PPM ports synchronously
- Two transparent serial data link, the end to end delay less than 10ms
- Transparent TCP/IP transmission channel, provides most flexibility for IP based devices to apply on UAV platforms
This model has advantages of light weight, mini size, low power consumption, high stability and receiving sensitivity. With RJ45 and TTL bidirectional serial port, this model can wireless transmit video and Ethernet Data.
Parameter
Model: ST10NPT | ||||
Frequency | 2.4GHz (2.402-2.478GHz) | Adjustable | ||
RF Transmitting Power |
ST5NPT: 23dBm(air to ground 5km) ST10NPT: 30Bbm(air to ground 10km) ST20NPT: 33dBm(air to ground 20km) |
|||
Frequency Bandwidth | 2MHz/20MHz | Adjustable | ||
Antenna | 1T1R | |||
Adjustment mode of bit rate | Software adjustment | |||
Communication Channel Encryption | WEP, WPA(PSK), WPA2(PSK), WPA+WPA2 (PSK), AES 125/256 | |||
Transmission Mode | point to point / point to multipoint | |||
Start-up time | < 30s | |||
Transmission Distance |
ST5NPT: Air to ground 5km ST10NPT: Air to ground 10km ST20NPT: Air to ground 20km |
|||
System Latency | 12-25ms | |||
Two-way function |
Integrate multiple radio links into one to transmit and receive. Support SBUS/PPM/TTLS 1 pro communication module |
Optional | ||
Transmitting Rate | 70Mbps | |||
Power | DC7-12V | DC7~18V Optional | ||
Power Consumption |
ST5NPT TX: 3Watts RX: 3Watts |
ST10NPT TX: 4Watts RX: 4Watts |
ST20NPT TX: 6Watts RX: 6Watts |
Maximum |
Temperature |
Operating temperature: -40 - 85°C Storage temperature: -55 - 100°C |
|||
Interface |
Power input interface × 1 Antenna interface × 1 RS232 Bidirectional Port × 1 Ethernet to USB / RJ45 on Windows × 1 |
Software adjustment | ||
Indicator Light |
RJ45 input/output indicator light Transmitting and receiving indicator light Transmitting and receiving indicator light Power light |
|||
Appearance Design | CNC technology/ double aluminum alloy shell with waterproof design | |||
Size | 68×48x14mm | |||
Net Weight | Tx:58g Rx: 58g |