Wilreless Video Audio Data Transmitter Link 5W 1.4GHz 30KM For Drone

1.4GHz 30KM Wilreless Video Audio Data 5W Transmitter Link for drone

1. Fast details of wireless video data link

     Operating frequency: 1.4GHz

     Wireless bandwidth: 3/5/10/20MHz

     Networking mode: point to point,point to multi point star networking

     Wireless transmit power: 5W

     Real Transmission distance: 30KM

     Service interface: 2 Ethernet ports, 3 RS232 Serial port, audio input and output ports

2. Description of wireless video data link

    Wireless Link device realize long-distance two-way wireless video, audio, data transmission,The maximum air-to-ground transmission distance can reach 30-50km. The device provides multiple service interfaces, including 2 Ethernet ports, 3 serial ports, and audio input and output interfaces.

3. Specification of wireless video data link

• Based on OFDM technology, two-way broadband wireless link device.
• Service interface: 2 Ethernet ports, 3 RS232 serial ports, audio input and output ports
• Dual antennas: SMA surface, ANT1 main antenna working in transceiver mode, ANT2 auxiliary antenna working in receive mode
• Wireless working: 1428~1448MHz or 806~826MHz,Supports automatic frequency hopping in frequency bands
• Wireless bandwidth: 3MHz, 5MHz, 10MHz, 20MHz, all nodes share working bandwidth, the maximum sharing rate of the system is 30Mbps.
• Modulation mode: QPSK/QAM16/QAM64 automatic adaptation.
• Networking mode: point-to-point, point-to-multi point star networking.
• Max Wireless Transmit Power: 5W
• The sensitivity of the node receive: 10MHz bandwidth-103
• Supports AES128 encryption and decryption
• Transmission distance: 30km
• Device configuration and wireless working status can be viewed through the network port web UI or serial port.
• Power Supply: 5W type:DC24~25V,The average power consumption of the video transmitter is less than 22W, and the average power consumption of the video receiver is less than 16W.
• Size: 103.4*61.4*22 mm(not include the surface that protrude from the hosing).
• Weight: 142g

4. Device Application of wireless video data link

     Use of ST30NMT-V2 can realize long-distance two-way wireless data communication, point-to-point two-way communication, and point-to-multi-point star networking two-way communication.In point-to-multipoint communication, if the communication between the two access nodes must be transferred through the central node, each node is in the same wireless LAN, all access nodes and the central node communication share the wireless working bandwidth, the device will automatically distribute the system rate equally.

     The data transmission from the central node to the access node is called the downlink, and the data transmission from the access node to the central node is called the uplink. In point-to-point or point-to-multipoint communication, the downlink shares the wireless operating bandwidth with the uplink. When the device is shipped, the default setting is the ratio of the upstream rate to the downstream rate = 4:1.

    Therefore, if the device is used to transmit IP Camera video data, the IP camera should be connected to the access node. The device automatically adjusts the wireless transmission rate according to the service data stream it carries, and the smaller the amount of service data it carries, the farther the transmission distance will be under the same conditions. Therefore, when using the device to transmit IP Camera video data, the wireless transmission distance can be improved by setting the appropriate reduction of the IP Camera video encoding bitrate.

Point-to-Point wireless communication

Point-to-multipoint wireless communication

Relay mode

5.FAQ

Q1. Can I have a sample order for wireless vedio data Link?

A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?

A: Sample needs 5-7 days, mass production time needs 1-2 weeks for order quantity more than

Q3. Do you have any MOQ limit for COFDM Transmitter order?

A: Low MOQ, 1pc for sample checking is available

Q4. How do you ship the goods and how long does it take to arrive?

A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5. Is it OK to print my logo on COFDM Transmitter product?

A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.